|
The project is stretched over 9 acres of land in Pimpri, Pune. Everything you could possibly need is close by, like upmarket malls, multiplexes, schools, hospitals, ATM's and playgrounds. It is also close to the Mumbai-Pune expressway and the Pune-Nashik highway. |
| |
| |
| Mahindra Royale is a project with 12 bldgs with 480 flats. |
On each floor 6 flats (2 flats of 3BHK and 4 flats of 2 BHK)
The area of 2 BHK flats varies from: 1142 sq. ft - 1224 sq. ft
The area of 3 BHK flats varies from: 1545 sq. ft - 1600 sq. ft |
In the External Amenities we have:
• Beautiful Landscaped gardens
• Swimming Pool
• Well - equipped Gymnasium
• Clubhouse
• Half Basket Ball Court
• Jogging Track
• Sandpit |
Mahindra Royale has incorporated the green design in all their buildings and has many firsts to its credit….
- Improvement of ventilation effectiveness by providing an open able window space to Floor space ratio of over 15% (as against the minimum of 4% stipulated by ASHRAE).
- Use of low VOC (Volatile Organic Compound) paints, adhesives and insulations inside the apartments for improved moisture management and control of contaminants. Above all a healthy environment for your kids.
- High–albedo-insulating material on the terrace roof, with a SRI (Solar Reflectance Index) value of over 78, to reduce heat absorption and the resultant energy demands for air-conditioning.
- Installation of high energy efficient low emissive glass in all fenestration which will have low SHGC (Solar Heat Gain Co-efficient) with U value less than 1 Btu (Thermal) /hr.sqft.ºF. This glass has a high light transmission ratio with low shading coefficient and in turn induces more daylight effect than normal glass. Due to low SHGC, the energy requirement for indoor air-conditioning is substantially reduced.
- Use of flyash based concrete bricks/blocks of low energy density for internal as well as external walls.
- Covering of walls with cement mortar plaster incorporating Polypropylene fibres and waterproofing admixtures. This kind of `Building Envelope’ protects the building from water leakage. It also promotes better insulation, thus reducing the energy demand for air-conditioning systems.
- Installation of highly water efficient fixtures with aerators will be installed in water outlets in each apartment to minimize wastage and reduce water demand by minimum of 30% w.r.t normal water fixtures.
- Development of an innovative erosion and sedimentation control management system outside the building, with a rainwater harvesting system and storm water management to recharge the ground water.
- Installation of an in-house STP (Sewerage Treatment Plan) to reuse wastewater generated from the building, to further reduce demand for water.
All the above initiatives will together create a healthy living space for our residents and result in interactive effects of energy efficiency measures. |
| Total No. of Bldgs: 12, (Windsor I & II, Lincoln I & II, Sterling I & II, Eden I & II, Earl I & II, Belmonte I & II) |
| |
Phase I |
Eden I & II, Earl I & II, Belmonte I & II |
| |
No. Of floors in each Building |
Ground + 6 floors |
| |
No. Of flats on each floor on the ground floor |
6 flats/ floor from 1st to 6th floor & 2 flats |
| |
Phase II |
| |
No. Of floors in each Building |
Stilt + 7 floors |
| |
No. Of flats on each floor |
6 flats/ floor from 1st to 7th floor |
| |
Area Range |
2 BHK (1181 sq.ft -1212 sq.ft) |
| |
3 BHK (1554 sq.ft.-1600 sq.ft) |
| |
|
|